Quincy Compressor Helps Industry Tackle the High Cost of Producing Compressed Air
BAY MINETTE, AL, March 31, 2010 - - Quincy Compressor announced today the release of its new QGV family of Variable Speed Drive air compressors which operates efficiently to reduce energy costs.
The QGV line is a complete family of variable speed compressors, with models from 20 to 200 horsepower. These innovative products allow customers to lower the energy consumption associated with producing compressed air, thereby lowering operating overhead and carbon footprint. The new QGV line is versatile as well, capable of operating continuously at full speed, if required. The Quincy QGV, available from 20-200 horsepower, can function as a base-load machine, providing fully rated capacity, or as a trim machine. In the trim position, the QGV only supplies the air required by the system while maintaining the target pressure within +/- 2 psi. The QGV can supply as little as 15% of full-load capacity, providing substantial energy savings over start/stop or modulating compressors. Other features include:
- Sound levels as low as 68 dB(A)
- Full-color touch screen control
- Real-time monitoring with performance trending
- Efficient operation to lower a customerrs carbon footprint
- Typically saves 35% energy versus traditional air compressors
- 75 to 150 PSIG operation
- Integrated Networking feature allows for automatic sequencing with applicable models
- Royal Blue Warranty- 10 year airend, 5 years on major components
About Quincy Compressor:
Since 1920, Quincy Compressor has been a leading manufacturer and supplier of air compressors, vacuum pumps and air treatment components. Quincy is headquartered in Bay Minette, AL, with manufacturing operations in Quincy, IL, and Kunshan, China. For more information about Quincy Compressor, please visit www.quincycompressor.com, or view the Meet Quincy Compressor video for a historical look at the people and products of Quincy Compressor.
|
|
With Price Reductions of Up to 70 Percent, Enfield Technologies Makes Proportional Pneumatic Control More Affordable
Thanks to some innovative engineering, Enfield Technologies has reached an important goal - making a complete proportional pneumatic control system much more affordable.
"We wanted to bring proportional pneumatics to new audiences," said Ed Howe, Enfield Technologies' President. "In motion control, that means a pneumatic actuator with intermediate positioning needs to break the $1,000 price barrier. We beat that target by a wide margin, with the total price of a basic system coming down from $1,841 to $884 - a reduction of 52 percent."
A basic positioning system includes a proportional valve and control electronics manufactured by Enfield Technologies paired with a pneumatic actuator and a position sensor provided by a variety of highly regarded partner companies. The same valves and control electronics used in motion control are also used for proportional pressure, flow, and force regulation applications.
During the last 18 months, Enfield Technologies has revised its sourcing and manufacturing processes. They have also reengineered several key products, adding new features, improving performance and reducing costs. This has allowed the company to offer price reductions averaging 42 percent on its primary components. For example, the LS-C10 controller dropped 70 percent, from $564 to $169.20, and the LS-V25s proportional valve dropped 45 percent, from $721 to $396.60. Enfield Technologies has also implemented volume discounts and an additional 5 percent bundle discount (bundle kits include a controller, valve and cable).
Enfield Technologies has added more than 35 technical resellers and integration partners over the last year. The company has also launched several new products, including the Enfinity System (C2 controller and M2 valves). "Expanded distribution and new products have led to growth and increased volumes," Howe said, "which has led to further cost reductions that we are passing along to our customers."
For more information, visit http://enfieldtech.com/affordable/
Contact:
Ed Howe
Enfield Technologies
35 Nutmeg Drive
Trumbull, CT 06611
P) 800-504-3334
203-375-3100
E) info@enfieldtech.com
W) enfieldtech.com
|
|
Fabco-Air, Inc. is pleased to announce a new product line: Series FML (Pneumatic) and FHL (Hydraulic) Swing Clamps.
The clamp arm rotates 900 as it extends away from the work piece providing clearance and access for unload/ load
operations.
Operation cycle:
1. Clamp arm extends (straight line) as it releases work piece from clamp loads
2. Arm rotates 900 to full extend position.
3. When retracting, clamp arm swings 900.
Model Code R = clockwise rotation
Model Code L = counterclockwise rotation
4. With clamp arm in position over the work piece, it follows a straight line path to apply clamping force.
Standard delivery is 7-10 days. Express delivery is available.
Please contact Fabco-Air, Inc. customer service with any questions.
Bulletin FML.H can be downloaded at
http://www.fabco-air.com/pdf/FML_swing_clamps_web.pdf
as well as from our main catalog download page.
Please contact Fabco-Air, Inc. customer service with any questions.
Contact Information
phone: (352) 373-3578
fax: (352) 375-8024
email: service@fabco-air.com
|
|
Connectors Provide Solenoid Valve Surge Suppression Protection
Canfield Connectorrs Series P5600 Micro Protective Connectors provide electrical controllers with surge protection
against voltage spikes that are caused by the solenoids used on hydraulic and pneumatic solenoid valves. These MPCs
are available in standard MINI, ISO, and Sub-Micro 8mm and 9.4mm. The P5600 connectors provide the advantages of
suppression such as reduced contact burnoff which increases switch life and reduced high frequency interference
pulses which lowers electronic noise. They are ideal for use with reed switch proximity sensors and will protect
programmable controllers and other types of electronic devices from inductive spikes. The Series P5600 connectors are NEMA 4 and IP 65 dust tight and water resistant and do not require additional modules or hardware. Consult the
manufacturer for available CSA versions.
The Series P5600 and all Canfield Connector products are manufactured to ISO 9001 with design specifications to the
highest quality standards. Complete specifications can be found at www.canfieldconnector.com or by calling Bob Howard
at 330-758-8299 x 122.
Canfield Connector
8510 Foxwood Court
Youngstown, Ohio 44514
Tel: (330) 758-8299
Fax: (330) 758-8912
|
|
Unique self-adjusting pneumatic cushioning system promises dramatic reduction in machine set-up times
Innovative end-position control system automatically adapts to prevailing load and speed conditions
Faster and safer cylinder installation, with optimal performance and maintenance-free operation
Northampton, August 26, 2009 --- Festo has developed a unique self-adjusting pneumatic cushioning system, which is now available as a build to order option for the company's popular DSNU series round cylinder pneumatic actuators. The new system employs innovative, patented air channel geometry to provide phased venting of the cushioning air. The system automatically adapts its characteristics to suit the cylinder's prevailing load and speed conditions, to provide optimum end-position cushioning.
Festo is initially offering the new self-adjusting cushioning system on its popular DSNU family of round cylinders. Models available with the new system span diameters from 16 to 63 mm, with stroke lengths up to 500 mm - and delivery is usually within 24 hours. The DSNU series of pneumatic actuators already offers users a choice of polymer (P) or manually-adjustable pneumatic (PPV) end-position cushioning, for applications involving low and high impact energy levels, respectively. The new self-adjusting (PPS) cushioning is primarily intended for medium impact energy applications, involving loads up to about 5 kg and speeds up to approximately 1 metre/sec. PPS cushioning is also available on Festo's CRDSNU corrosion-resistant stainless steel round-line cylinders, which offer the additional benefit of cleaner lines for improved wash-down by eliminating any potential for dirt entrapment around a cushioning screw.
Because the exhaust flow of the pneumatic cushioning chamber changes over the damping stroke, Festo's PPS system works with most commonly permissible speed and mass combinations, making it suitable for a wide range of applications. As Steve Sands, Festo's Product Manager, points out, "Round cylinders account for a significant proportion of our pneumatic actuator sales, and about 60 percent of the DSNU cylinders that we sell are equipped with PPV cushioning; of these, about 80 percent are used for applications that would benefit directly from our new PPS self-adjusting cushioning. Given that the PPS system actually costs less than our manually-adjustable technology, saves setting-up time and is always providing the optimum cushioning, we expect it to be a very popular choice with machine builders."
The advantages of self-adjusting end-position cushioning are considerable. Manually adjusting the end-position damping of linear actuators is time-consuming, and can only be done effectively once the actuator is in-situ and under operating load conditions. By then the automation supplier is invariably under pressure to complete the task as quickly as possible. It also frequently involves two people - one to operate the appropriate pneumatic valve, the other to adjust the actuator's damping characteristics. As with all moving parts, access can be potentially hazardous, which means that safety considerations dictate that only experienced personnel should perform these adjustments. Actuators are often less than perfectly adjusted, with under-damping resulting in higher end-position impacts, higher noise levels and increased wear, or with over-damping resulting in increased machine cycle times.
Festo estimates that on average, the new PPS self-adjusting end-position cushioning system will help users shave five minutes off a cylinder's installation and set-up time. For a typical application, such as a package sorting system with, say, 60 cylinder-driven routing stations, this would result in savings of five man-hours.
Festo's PPS self-adjusting end-position cushioning provides a complete 'fit and forget' solution. Since it has no settings to change it is completely tamper-proof, and it offers a long, maintenance-free service life. Festo DSNU pneumatic cylinders equipped with the new PPS system are 100 percent interchangeable with the company's manually-adjustable DSN-PPV models.
|
|
VACUUM TILTER-ROTATOR REORIENTS AND POSITIONS LARGE SHEET
A hoist-operated vacuum powered tilter with manual rotation for reorienting and positioning large metal, wood, plastic, composite, and fiberglass panels is being introduced by Anver Corp. of Hudson, Massachusetts.
The Anver PF Series Vacuum Tilter-Rotator is a below-the-hook vacuum powered lifter with 90 degree powered tilting and 360 degree manual rotation to let a single operator reorient and position large sheet. Featuring quad-spring mounted vacuum suction pads that are easily adjustable along a 10 ft. beam, this work positioner has fully integrated pendant controls on the handlebar.
Allowing workers to easily change load orientation during a process, the Anver PF Series Vacuum Tilter-Rotator is designed for loads up to 1,000 lbs. Supplied in models powered by compressed air or 115 VAC, standard features include an ergonomic handlebar, a vacuum gauge and leakage sensor with audio-visual alarms, and a wide selection of rubber vacuum suction cups.
Anver PF Series Vacuum Tilter-Rotators are priced from $5,995.00 up.
Price quotations and literature are available upon request.
For more information contact:
Anver Corporation
Scott Dillon, Group Manager
36 Parmenter Rd.
Hudson, MA 01749
(800) 654-3500 FAX (978) 568-1570
www.anver.com
|
|
Self-Adjusting Magnetic Proximity Sensor Works in General Locations
Canfield Connectorrs rugged 7GL magnetic proximity sensor, which features a floatingg clamp design that adapts to NFPA linear actuators with 2 to 8 inch bore tie rod cylinders, is made to sense an actuator position in stringent, general location applications. The normally open 7GL has a robust, vibration and shock resistant aircraft aluminum body, a fully epoxy encapsulated electronic circuit, and a cam-lock clamp that ensures proper assembly and sensor position. It operates in a temperature range from -200 to +800C, has a voltage range of 0 120VAC/VDC 50/60 Hz, and can switch current up to .5 Amps. This versatile sensor has environmental protection rating NEMA 1, 4, and 13 and is wash-down compatible.
The 7GL and all Canfield Connector products are manufactured to ISO 9001 with design specifications to the highest quality standards. Complete specifications can be found at www.canfieldconnector.com or by calling Bob Howard at 330-758-8299 x 122.
Canfield Connector
8510 Foxwood Court
Youngstown, Ohio 44514
Tel: (330) 758-8299
Fax: (330) 758-8912
|
|
New "A" Series Pilot Operated Check Valves with Flow Controls from NGT
1/8, 1/4, and 3/8 NPTF "A" Series Valves from NGT
The new "A" Series valves with flow controls, provide air-tight locking with metered flow from the output to input. The combination of the smaller valve and the built-in flow control provides a small package that is ideal for lowering loads carried by large cylinders. The manual release is also metered so that
when activated, the load will not crash to the ground.
NGT, LLC
P.O. Box 5223
Elm Grove, WI
USA
Phone: 262) 782-6125
Fax:(262) 782-0197
|
|
Bimba Introduces New Movable Housing Linear Slide
Monee, ILLBimba Manufacturing is pleased to introduce the newest addition to their linear slide product offering, the Movable Housing Linear Thruster. The Movable Housing Linear Slide is available in bore sizes 9/166 through 33, spanning 7 different bore
sizes and five guide shaft diameters. In addition, the Movable Housing Linear Slide is available with ball bearings (Model TMH) or composite bearings (Model TEMH) with both styles housed in black anodized carriages.
This design compares favorably to competitive movable housing or gantry slides in load carrying capability, offering up to 50% more load carrying capability than the most popular competitive models,, said Bimbaas linear thruster Product Manager, Tom Carlson. To achieve increased load carrying, the new Movable Housing linear thruster uses a precision machined housing, guided by precision ground, case hardened chrome plated shafts powered by Bimbaas
original round line cylinders.
Optional features include air cushions, internal and external bumpers and magnetic position
sensing. For full product details and ordering information, visit
http://www.bimba.com/Products/LinearThrusters/Movable_Housing/
About Bimba:
Bimba Manufacturing is a forward-thinking innovator of actuation technology, specializing in
providing cutting-edge solutions to engineering challenges. Its capabilities include an
extensive line of industry-leading air cylinders, rotary actuators, linear thrusters,
rodless cylinders, flow controls and position-sensing cylinders. In addition to its broad
line of standard catalog products, Bimba also develops many custom and semi-custom products
designed for specific customers and applications. These products, used in machinery and
automation, are sold to original equipment manufacturers and end-users throughout the world
in an expanding variety of industries.
|
|
PNEUMATIC ZERO POSITION FIXED JAW GRIPPER
The AGPS fixed jaw parallel grippers offer a unique gripping solution for applications that require a zero point for exact part pick up or placement and high loading capability. The compact size of this pneumatic gripper linear actuator is ideal for use in tight spaces needing large payloads with a quick clamping cylinder.
The one-piece body and stationary jaw design integrated with the precision T-slot bearing design that is supported the full length of the body is designed to carry heavy loads. AGPS
straight-line design offers high moment load and high accuracy in a compact lightweight package that features a lightweight aluminum base that is hard anodized and a carriage bearing made from Ampco 18 aluminum-bronze. Standard mounting and dowel holes on the slide jaw carriage endplate make it easy to attach the tooling jaws and the unit's base offers four holes for mounting. Hardened stroke adjustments and locks are standard on end of extend
and retract of stroke offer excellent zero point repeatability.
AGPS series mini-linear actuators from AGI provide grip force of 15 to 25 lbs. with four
stroke sizes up to two inches, yet the total height of the assembly is only 0.813 inches it
is one of the smallest commercially available pneumatic actuator.
The pneumatic gripper linear actuator is part of a new product line that offers flexible
configurations. The grippers have two bore sizes .5 and also a .75 inch available in .5,
1.0, 1.5 and 2.0 inch strokes. Optional switch kits allow the use of inductive proximity
switches for easy interfacing to electrical controls.
AGI supplies a complete range of sophisticated automation products that include, parallel
grippers, rotary actuators, thrusters, linear actuator slides, mini slides, tool changers,
and overload devices. All the units are available in imperial and metric versions for
flexibility of design for a world market.
For more information on this product, send for a FREE catalog today. For immediate
assistance, call AGI, at (203) 459-8345 or visit our web site at www.agi-automation.com
|
|
